RECOMMENDED READING LISTS
- TA002 BUILDING CONTROLS
- TA005 PLAN PROCESSING
- TA006 SITE INSPECTION
- TA007 ADVANCED PLAN PROCESSING (USING THE SIMPLE HOUSE ACCEPTABLE SOLUTION)
- TA008 NZS3604:2011 TIMBER FRAMED BUILDINGS
- TA009 NZS4229:2013 CONCRETE MASONRY BUILDINGS NOT REQUIRING SPECIFIC ENGINEERING DESIGN
- TA010 LIGHT STEEL FRAMING
- TA013 E2 - WEATHERTIGHTNESS
- TA014 B2 - DURABILITY
- TA016 CLAUSE D1 - ACCESS ROUTES
- TA017 SERVICES AND FACILITIES
- TA019 PLUMBING AND DRAINAGE COMPLIANCE
- TA020 FIRE DOCUMENTS
- TA022 BWoF AND SPECIFIED SYSTEMS
TA002 BUILDING CONTROLS
RECOMMENDED READING:
It is recommended that you become familiar with the following material before you attend the course.
- Building Officials Guide to the Building Act
- Handbook to the Building Code and Compliance Documents (Third edition, including amendment 13) [PDF 2 MB, 226 pages] Effective from 14 February 2014
TA005 PLAN PROCESSING
required Reading
It is essential that you read Module 1 of the course materials, this will be sent to you in advance of the course start date.
RECOMMENDED READING:
- Handbook to the Building Code and Compliance Documents (Third edition, including amendment 13) [PDF 2 MB, 226 pages] Effective from 14 February 2014
TA006 SITE INSPECTION
SITE VISIT REQUIREMENTS:
Personal safety equipment to bring for the off site visit:
- Safety Boots, High Viz Vest & Hard Hat
RECOMMENDED READING:
It is recommended that you become familiar with the following material before you attend the course:
- Building Act 2004 (reprint 20 May 2014)
- Handbook to the Building Code and Compliance Documents Third edition (including amendment 13)[PDF 661 KB, 58 pages] Effective from 14 February 2014
- If you already work for a Building Consent Authority it would be really useful to bring copies of your own inspection sheets.
- Also, please bring a copy of your in-house inspection procedures. This will ensure a meaningful learning experience in that you can relate the theory to your real-life work practice.
TA007 ADVANCED PLAN PROCESSING (USING THE SIMPLE HOUSE ACCEPTABLE SOLUTION)
RECOMMENDED READING:
It is recommended that you become familiar with the following material before you attend the course:
- The Building Code Compliance Documents
- Building Officials - Building Act 2004 Overview
- BRANZ Building Basics: Steel Framing
- NASH Handbook; Best Practice for Design and Construction of Residential and Low-rise Steel Framing
TA008 NZS3604:2011 TIMBER FRAMED BUILDINGS
Required Reading:
What to bring to the course:
It is a course requirement that you bring a copy of NZS3604 and NZBC - B1 Structure to the course, your BCA should have a copies of these:
- NZS3604 This can be purchased from - Standards NZ
- NZBC - B1 Structure
RECOMMENDED READING:
It is recommended that you become familiar with the following material before you attend the course:
- NZS3602. This can be purchased from - Standards NZ
- BRANZ House Building Guide - This can be purchased from BRANZ
TA009 NZS4229:2013 CONCRETE MASONRY BUILDINGS NOT REQUIRING SPECIFIC ENGINEERING DESIGN
Required Reading:
It is essential that you read Module 1 of the course materials, this will be sent to you in advance of the course start date.
What to bring to the course:
It is a course requirement that you bring a copy of NZS4229 to the course, your BCA should have a copy of this:
- NZS4229:2013. This can be purchased from - Standards NZ
- A calculator or calculator enabled device.
RECOMMENDED READING:
It is recommended that you become familiar with the following material before you attend the course.
- NZS4210:2001. this can be purchased from - Standards NZ
- NZCMA: Concrete Masonry Manual: 4.2 Standard Specifications for Concrete Masonry Buildings Not Requiring Specific Engineering Design
- CCANZ: Code of Practice for Weathertight Concrete and Concrete Masonry Construction
- BRANZ: Good Practice Guide Concrete Masonry
- NZCMA Manual (2011) Section 1.2: Concrete Masonry Wall Units
- NZCMA (2007) Concrete masonry: a guide to weathertight Construction
- NZCMA (2010) Masonry Manual: Section 3.1: Basic Masonry Construction
- NZCMA (2011) Masonry Manual: Section 1.5: Block laying
- CCANZ Information Bulletin: IB 47. Starter bars - Concrete Masonry
TA010 LIGHT STEEL FRAMING
RECOMMENDED READING:
It is recommended that you read the following material before the course:
TA012 H1 - ENERGY EFFICIENCY
Required Reading:
It is essential that you read Modules 1 & 2 of the course materials, these will be sent to you in advance of the course start date.
What to bring to the course:
It is a course requirement that you bring a copy of NZBC - H1 Energy Efficiency to the course, your BCA should have a copy of this.
RECOMMENDED READING:
Standards available from - www.standards.co.nz
- NZS 4218: 2004 Energy Efficiency - Housing and the small building envelope
- NZS 4214: 2006 Methods of determining the total thermal resistance of parts of a building
- NZS 4305: 1996 Energy efficiency - domestic hot water systems
- NZS 4243: 2007 Energy efficiency - large buildings, Part 1: Building thermal envelope
- NZS 4243: 2007 Energy efficiency - Large buildings, Part 2: Lighting
- BRANZ: House Insulation Guide
- BRANZ: ALF 3, The annual loss factor
TA013 E2 - WEATHERTIGHTNESS
REQUIRED READING:
It is essential that you read Module 1 of the course materials, this will be sent to you in advance of the course start date
What to bring to the course:
It is now a requirement that you bring a copy of the Acceptable Solutions and Verification Methods for the NZ Building Code Clause E2 External Moisture to the course, below is the link where you can download this information.
- E2 External Moisture (Third edition, including amendment 10) [whole document - PDF 15 MB, 197 pages] Effective from 5 November 2020
TA014 B2 - DURABILITY
REQUIRED READING:
Please bring to course:
It is a course requirement that you bring a copy of Acceptable Solutions and Verification Methods for B2 Durability to the course (an electronic version is fine). Your BCA should have hard copies of these.
Acceptable Solutions and Verification Methods for B2 Durability can be downloaded from below:
https://www.building.govt.nz/building-code-compliance/b-stability/b2-durability/
RECOMMENDED READING:
It is recommended you become familiar with the following material before attending this course.
NZS 3604: 2011 Timber framed Buildings (Section 4)
https://www.standards.govt.nz/shop/nzs-36042011/ (free download)
BRANZ Study Report SR241 Corrosion of fasteners in treated timber (2011) and Appendix
https://www.branz.co.nz/pubs/research-reports/sr241/ and
https://www.branz.co.nz/pubs/research-reports/sr241a/
Code of practice for weathertight concrete and concrete masonry construction
https://cdn.ymaws.com/concretenz.org.nz/resource/resmgr/docs/ccanz/ccanz_cp01.pdf
TA015 CLAUSE F1 - SAFETY OF USERS
Required Reading:
What to bring to the course:
It is a course requirement that you bring a copy of, and read, Code Clauses F1 - F4 to the course. Your BCA should have copies of these:
RECOMMENDED READING:
It is recommended that you read the following material before the course:
TA016 CLAUSE D1 - ACCESS ROUTES
Required Reading:
What to bring to the course:
It is a course requirement that you bring a copy of, and read, Code Clause D1 to the course. Your BCA should have a copy of this.
RECOMMENDED READING:
It is recommended that you read the following material before the course:
TA017 SERVICES AND FACILITIES
RECOMMENDED READING:
It is recommended that you read the current versions of the Acceptable Solutions and Verification Methods associated with the following Building Code clauses, before the course:
- G1 Personal Hygiene https://www.building.govt.nz/building-code-compliance/g-services-and-facilities/g1-personal-hygiene/
- G2 Laundering https://www.building.govt.nz/building-code-compliance/g-services-and-facilities/g2-laundering/
- G3 Food Preparation and Prevention of Contamination https://www.building.govt.nz/building-code-compliance/g-services-and-facilities/g3-food-preparation-and-prevention-of-contamination/
- G4 Ventilation https://www.building.govt.nz/building-code-compliance/g-services-and-facilities/g4-ventilation/
- G5 Interior Environment https://www.building.govt.nz/building-code-compliance/g-services-and-facilities/g5-interior-environment/
- G6 Airborne and Impact Sound https://www.building.govt.nz/building-code-compliance/g-services-and-facilities/g6-airborne-and-impact-sound/
- G7 Natural Light https://www.building.govt.nz/building-code-compliance/g-services-and-facilities/g7-natural-light/
- G8 Artificial Light https://www.building.govt.nz/building-code-compliance/g-services-and-facilities/g8-artificial-light/
- G9 Electricity https://www.building.govt.nz/building-code-compliance/g-services-and-facilities/g9-electricity/
- E3 Internal Moisture https://www.building.govt.nz/building-code-compliance/e-moisture/e3-internal-moisture/
TA019 PLUMBING AND DRAINAGE COMPLIANCE
Required Reading:
It is essential that you read Module 1 of the course materials, this will be sent to you in advance of the course start date.
What to bring to the course:
It is a course requirement that you bring copies of the following to the course, your BCA should have copies:
- E1 Surface Water (incl amendment 9) [PDF 1.54 MB, 50 pages] Effective from 14 February 2014
- G12 Water Supplies (incl amendment 9) [PDF 1.60 MB, 72 pages] Effective from 14 February 2014
- G13 Foul Water (Second edition incl amendment 5) [PDF 2.10 MB, 62 pages] Effective from 14 February 2014
- AS/NZS 3500 - part 2 inclusive. This can be purchased from - Standards NZ
RECOMMENDED READING:
It is recommended that you become familiar with the following material before you attend the course:
Legislation:
All available from - http://www.legislation.govt.nz
- Building Act 2004 (Reprint 20 May 2014)
- Local Government Act 1974
- Local Government Act 2002
- Plumbers, Gasfitters and Drainlayers Act 1976
- Plumbers, Gasfitters and Drainlayers Act 2006
- Health (Drinking Water) Amendment Act 2007
Ministry of Business, Innovation and Employment Compliance Documents:
All available from MBIE, click here
- B2 Durability (incl amendment 8) [PDF 559 KB, 32 pages] Effective from 14 February 2014
- E3 Internal Moisture (incl amendment 5) [PDF 783 KB, 22 pages] Effective from 14 February 2014
- G1 Personal Hygiene (incl amendment 6) [PDF 594 KB, 34 pages] Effective from 10/10/11
- G4 Ventilation (Third Edition incl amendment 3) [PDF 598 KB, 28 pages] Effective from 14 February 2014
Standards:
- AS/NZS 3500 - parts 0 - 1. This can be purchased from - Standards NZ
TA020 FIRE DOCUMENTS
What to bring to the course:
- A scale ruler
RECOMMENDED READING:
It is recommended that you become familiar with the following material before you attend the course:
C PROTECTION FROM FIRE
The below are all available from MBIE, click here
- Building Code Clauses C1-C6 Protection from Fire
- C/VM2 including amendment 6
- C/VM1 and C/AS1 including amendment 5
- C/AS2 2019 including amendment 2
- Practice Note 22 Documenting fire safety design
- MBIE guide to requesting information for means of escape.
TA022 BWoF AND SPECIFIED SYSTEMS
RECOMMENDED READING:
MBIE Guidance on Building Warrants of Fitness and Compliance Schedules: